FOLLOW US
Product Catagories
EPDM TARTAN FLOOR COATINGS
Tartan Floor materials for athletics are imported from abroad. We are the main distributor in Turkey of the coatings manufactured by PLASTIC POLYURETHANE; and these coatings are certified with ISO 9001-2000, ISO 14001-ITF Federation certificate, and comply with DIN Norms.
EPDM Tartan Floor Coating Application Method
Required Material List

a) Acrylic Primer 150 g/m²
b) Plastic Granule 8000 g/m²
c) Binder 700 g/m²
d) Sealer 700 g/m²
e) Polyurethane 2000 g/m²
f) EPDM Granule 1500 g/m²


Application Method

Application Method
• After cleaning the proper concrete or asphalt ground, Premier surface cleaner is applied with a spatula.
Approximately 150 g/ m²

• SBR Plastic Granule 8000 g/m² and Binder 700 g/m² materials are mixed in the mixer with a thickness of 10 mm and the rubber coat is laid on the cleaned surface by a finisher.

• SEALER special filling material is applied with a spatula on the rubber coating, thus the pores are filled.
Approx. 700 gr / m²

• When the filling material is cured, 2-compound POLYURETHANE surface coating is applied to the upper coat by mixing and pouring on-site in 2 stages and a thickness of 3 mm is obtained.
Approx. 2000 gr / m²

• EPDM material no 1-3 is laid on the polyurethane material freely. Remaining material is cleaned with vacuum cleaner.
Approx. 1500 gr / m²

• Athletics track is put to service after drawing field markings with the internationally standard colors.

Technical Specifications

√ It is very resistant against scratches and wear.

√ It is not affected by the pressure of the heavy bodies to the ground.

√ The ground that the material will be applied shall be smooth and even, it shall not be slant and shall be damp-proof.

All Rights Reserved © 2011 Sportes Spor Tesisleri Yapımı İnşaat
Taahhüt San. ve Tic. Ltd. Şti.
developed & designed by maya interactive